- Compatible with 14-later Harley-Davidson Touring models, FLHTCU, FLHTCUL, FLHTK, FLHTKL, FLTRU and 16-later FLHTKSE and FLTRUSE models with hard saddlebags fit like OEM Part# 67800449A
- REFERENCE: For 2014 Electra Glide Ultra Classic FLHTCU / Ultra Limited FLHTK; 2015 Electra Glide Ultra Classic FLHTCU/ Electra Glide Ultra Classic Low FLHTCUL/ Ultra Limited FLHTK / Ultra Limited Low FLHTKL
- REFERENCE: For 2016 Electra Glide Ultra Classic FLHTCU / Low FLHTCUL / Ultra Limited FLHTK / Low FLHTKL / CVO Limited FLHTKSE / Road Glide Ultra FLTRU / CVO Road Glide Ultra FLTRUSE; For 2017-2019 Electra Glide Ultra Classic FLHTCU / Ultra Limited FLHTK / Low FLHTKL / CVO Limited FLHTKSE / Road Glide Ultra FLTRU; 2020 Ultra Limited FLHTK / CVO Limited FLHTKSE / Road Glide Limited FLTRK
- MULTIPLE FUNCTION: Self-adhesive lamps fit seamlessly beneath the saddlebag lid and add a stylish touch of color, even Parking ; Design for Self-adhesive lamps fit seamlessly beneath the saddlebag lid and add a stylish touch of color, even Parking
- PACKAGE INCLUDED: Left and right lamps, modulator, and all wiring harness
Overview: Astra Depot Aftermarket Harley Tour-Paks Tail Light 100% brand new made of High quality ABS plastic. The LED lamps can fast-acting glow red bright when the ignition is switch on , and strengthen when the turn signals or brakes are activated. Even when the motorcycle is parked, the self-adhesive lamp can be securely under the saddle cover and will not loosen. they can add a more cool look to your motor. Designed with a low profile frame, the contours perfectly match the curve of the original saddle bags without dimensional errors.
Specifications:
Specification:
Input: 12V/8W
Output: DC6V/12W
Input Voltage: 8-DC18V
Input Current: 1.5A
Cable Length: 55 1/8'' (140cm)
Light Color: Red
Housing Color:BLACK or CHROME
Weight: 350g
Installation:
** Placement: The left and right sides of the rear for the moto saddle bags
Step 1: Unplug the existing connector and plug the control box into the two ends of the connector you just unplugged - then run the long ones out to the bags
Step 2: Before you zip-tie them in place, check your turn signals to make sure you have the right & left sides correct
Step 3: Ran the wires out to just behind the shocks and then up and over into the bags (with the connector for each light inside the bags)
Step 4: Please use alcohol to rubbing to make sure your bags are clean before sticking the lights on
Step 5: Peel a small part of the red stuff off the double-sided tape first. Hold them in place and peel the rest from underneath (while still holding in place). Press firmly to make sure it's stuck tight
